Cabletron Systems CSX1200 User Manual

Also see for CyberSWITCH CSX1000: User guide Quick start

Contents

Workgroup Remote Access Switch 375S YSTEM VERIFICATIONVerifying SNMP is Operational2. If Remote Mac appears in Select a file server: box, then AppleTalk Routing over the WANconnection is operational.3. If Remote Mac IS NOT displayed, then AppleTalk Routing feature over the WAN connectionis not operational. Refer to AppleTalk Routing Operation Over the WAN Connection in the ProblemDiagnosis chapter.V ERIFYING SNMP IS O PERATIONAL1. To verify that the SNMP feature is operational, enter thesnmp stats command at theadministration console. If the statistics display appears, the SNMP subsystem should be fullyoperational. If the following message is displayed, SNMP is not operational:SNMP is not enabledIf the preceding message is displayed, refer to SNMP in the Problem Diagnosis chapter forpossible actions you may take to make the SNMP feature operational.2. To verify that the MIB objects can be retrieved via the SNMP get command, begin by makingsure that the latest version of the enterprise MIB (the ih_mib.asn file) has been compiled at thedesired SNMP network management station(s). Once the new version of the MIB is compiled,you can issue the SNMP get command.3. To verify the CyberSWITCH SNMP Agent is returning the correct values, it is possible tocompare the values of the MIB objects retrieved via the SNMP get command to the outputavailable via various system administration console and dynamic management commands.For example, theisdn usage console command displays B-channel information. Thisinformation corresponds to the MIB isdnUsageMonitor group objects, a subset of theihSystemMonitor group. Thedr console command will return output that containsinformation that corresponds to the MIB ihStatusReport table. Other console commands thatwill output information that includes values that correspond to MIB objects areds,udp stats,ip stats, andsnmp stats.