Cabletron Systems CSX1200 User Manual

Also see for CyberSWITCH CSX1000: User guide Quick start

Contents

Workgroup Remote Access Switch 509R EMOTE M ANAGEMENTTFTPTFTPTFTP (Trivial File Transfer Protocol) is the standard way of providing file transfers betweendevices. With TFTP any WAN or LAN user executing a standard TFTP client program can transferfiles to and from the CyberSWITCH. You can control access to the different file types. Statisticsconcerning the file accesses are available. This feature can be used to retrieve report and statisticsfiles, and to perform remote node configuration.I NSTALLATION AND CONFIGURATIONTFTP is available to the user by default. No installation or configuration steps are required.You can limit the access to files by using thefileattr andtftp commands of the DynamicManagement feature. Thefileattr command allows you to change the access rights for each filetype depending on access level. The tftp command provides the ability to change the TFTP Serverfile access rights by assigning a user’s file accesses rights to the TFTP server. Thetftp commandalso provides the ability to disable the TFTP client component, TFTP Server component or thewhole TFTP feature.SITE.2Remote 1SITE HQTFTP Client PCRemote 1ISDNWORKGROUP REMOTE ACCESS SWITCHLAN10BASE-TRXTXSERVICE CH-2D-CHCH-1SYNCPOWERLINE1CH-2D-CHCH-1SYNCLINE2CH-2D-CHCH-1SYNCLINE3CH-2D-CHAGICH-1SYNCLINE4WORKGROUP REMOTE ACCESS SWITCHLAN10BASE-TRXTXSERVICE CH-2D-CHCH-1SYNCPOWERLINE1CH-2D-CHCH-1SYNCLINE2CH-2D-CHCH-1SYNCLINE3CH-2D-CHAGICH-1SYNCLINE4WORKGROUP REMOTE ACCESS SWITCHLAN10BASE-TRXTXSERVICE CH-2D-CHCH-1SYNCPOWERLINE1CH-2D-CHCH-1SYNCLINE2CH-2D-CHCH-1SYNCLINE3CH-2D-CHAGICH-1SYNCLINE4