Cabletron Systems CSX1200 User Manual

Also see for CyberSWITCH CSX1000: User guide Quick start

Contents

USER’S GUIDE330 CyberSWITCHVRA M ANAGER AS A C ALL CONTROL M ANAGERThis feature allows you to use the Virtual Remote Access (VRA) Manager for call controlmanagement only. This feature allows you to continue to use other authentication servers (e.g.,RADIUS, ACE) yet still gain the benefits of VRA call control management.CONFIGURING VRA M ANAGER FOR C ALL CONTROLU SING CFGEDIT1. Select VRA as Call Control Manager from the Call Control Options menu.2. The current status of the VRA Call Control Server will be displayed. Select 1 to toggle betweenenabled and disabled, and ensure an enabled setting.3. Select TCP port number if you wish to change this setting. Changes here will also appear on theVRA Authentication menu.4. Return to the Main Menu.5. For authentication, if you are using the On-node Device Table or Off-node Device Level Security,you are finished with the configuration of this feature. If you are using User Level Security, youmay wish to adjust the Authentication Time-out and/or change the Call Control Failurebanner. Continue with the following steps.6. Select Security and then Network Login Information.7. Select Network Login General Configuration.8. Select Authentication Timeout. Follow on-screen instructions to adjust this value.9. Return to the Network Login Information Menu and select Network Login Banners.10. Select the Call Control Failure Banner. Follow on-screen instructions to adjust this banner.Note: If you are using the VRA Manager as your authentication manager, you do not have toconfigure the call control option separately. This is only necessary when you areconfiguring another device for authentication, and wish to use VRA for call control only.CONFIGURATION ELEMENTSS TATUSAllows you to enable or disable VRA for call control management.TCP PORT NUMBERThe TCP port number used by the VRA Manager. Note that you can assign a user-defined portnumber, but that the VRA Manager TCP port number must be entered identically on both theCyberSWITCH and the VRA Manager.