Cabletron Systems CSX1200 User Manual

Also see for CyberSWITCH CSX1000: User guide Quick start

Contents

Workgroup Remote Access Switch 477SYSTEM M ESSAGESSystem Message Summary[TFTP] Data buffer allocated successfullyAll parts of the TFTP feature (both Server and Client) were successfully initialized.Note: The following “[TFTP] Local error...” messages generated during client operations will bedisplayed on the console only and will not be logged to disk.[TFTP] Local error # 2: Feature not initializedThe TFTP feature was not initialized properly. No file transfer will be attempted. Check theconfiguration, and then contact your Distributor or Customer Support.[TFTP] Local error # 3: Server not initializedThe TFTP Server was not initialized. The TFTP Server will not attempt any file transfers. Check theconfiguration, and then contact your Distributor or Customer Support.[TFTP] Local error # 4: UDP rejected packet The UDP subsystem could not send the data because there was a problem with the file. If thismessage appears consistently, contact your Distributor or Customer Support.[TFTP] Local error # 5: UDP open failedThe UDP subsystem could not open a new port. No file transfer will be attempted. Check theconfiguration, and then contact your Distributor or Customer Support.[TFTP] Local error # 6: All UDP buffers in use All of the TFTP/UDP buffers are in use. There may be a problem with the specified file; tryreplacing it. If this message appears consistently, contact your Distributor or Customer Support.[TFTP] Local error # 7: Received packet with size zeroThe TFTP protocol received a packet with no data.[TFTP] Local error # 8: No route defined The TFTP protocol was instructed to start a TFTP session with an IP ADDRESS (HOST) for whichthere is no defined route. There may be a problem with the specified file; try replacing it. If thismessage appears consistently, contact your Distributor or Customer Support.[TFTP] Local error # 9: File transfer timed out The TFTP file transfer timed out. There may be a problem with the specified file; try replacing it. Ifthis message appears consistently, contact your Distributor or Customer Support.[TFTP] Local error # 10: IP addressing inconsistency detectedThe TFTP protocol received a packet from a host for which no file transfer was being processed.This should not affect any files being transferred.[TFTP] Local error # 11: Received packets out of sequence The TFTP protocol received a data packet that either was too old or one was skipped. There maybe a problem with the specified file; try replacing it. If this message appears consistently, contactyour Distributor or Customer Support.[TFTP] Local error # 12: Bad packet length received The TFTP protocol received a packet that was too big. There may be a problem with the specifiedfile; try replacing it. If this message appears consistently, contact your Distributor or CustomerSupport.