Cabletron Systems CSX1200 User Manual

Also see for CyberSWITCH CSX1000: User guide Quick start

Contents

USER’S GUIDE162 CyberSWITCHFor IP Remote LAN networks, you must explicitly configure the IP (Sub)Network number.For IPX Remote LAN networks, you may configure the IPX external network number, or youmay leave the value at NONE. The IPX Spoofing Options for IPX Remote LAN devices are notavailable at this time. For additional information, please refer to the Configuring IPX chapter,Remote LAN Devices.For AppleTalk Remote LAN networks, you may configure the AppleTalk network number/range (used on the Remote LAN for this device), or you may leave the value at NONE.13. To enable per-device compression information, select Compression from the Device TableMenu. The following menu will then be displayed:a. If compression is not already enabled for this device, press 1 and follow the onscreeninstructions to change the configuration to enabled.b. If the remote device does not use 1 as the starting PPP STAC-LZS sequence number, press2 to enter a new value for the starting sequence number.U SING M ANAGE M ODE C OMMANDSdeviceDisplays the current Device Table. Included in this display is each device’s ID and name. Afterthe list has been displayed, you may enter a specific device Id to display detailed informationfor that device.device addAllows you to add a device entry to the Device Table. You will be prompted for the devicename and device type. The rest of the information you will be prompted for will depend uponthe device type you are configuring, and the security options that are enabled. Note that thedevice name is case sensitive. You are prompted for the device information similarly to the wayyou are prompted by CFGEDIT. Refer to the above section, Using CFGEDIT for instructions.device changeAllows you to change information for a specific device entry. The current device table will bedisplayed. Enter the device Id or device name of the entry you wish to change. Note that thedevice name is case sensitive. Step through the configuration information displayed for thedevice, pressing if you wish to keep the originally configured information, andentering new information where you want it changed. For a definition of the configurationelements, refer to the section, On-node Device Database Configuration Elements.device deleteAllows you to delete a device entry for a specific device. The current device table will bedisplayed. Enter the device Id or device name of the device whose device entry you wish todelete. Note that the device name is case sensitive.Device Compression Menu: (device = "DAN")1) Compression ENABLED2) Starting PPP STAC-LZS Sequence Number 1Select function from above or for previous menu: