USER’S GUIDE262 CyberSWITCHRouters shown in the diagram above. Sample configurations for the objects in the above networkdiagram are as follows:Note: The DHCP Server must have a route specified to get back to the DHCP-enabled routerRuby, or use Alex as its default gateway.Configuration for IP Router "Alex" Configuration for IP Router "Ruby"System Information:System Name = AlexSystem Password = stoneSystem Information:System Name = RubySystem Password = rubbleSecurity Level = Device Level (On-nodeDevice Database, PAP security)Security Level = Device Level (On-nodeDevice Database, PAP security)Bridging disabled Bridging disabledIP enabled (router mode)I/F = LAN (192.168.1.168)I/F = WAN (192.168.10.168)Static Route = (dest) 204.157.42.0(next hop) 192.168.10.1IP enabled (router mode)I/F = LAN (204.157.42.168)I/F = WAN (192.168.10.1)DHCP enabledRelay Destination # 1 = 192.168.1.5(interface = “N/A”)Hop Count Threshold = 4DHCP enabledRelay Destination # 1 = 192.168.10.168(interface = “N/A”)Hop Count Threshold = 4Device = “Ruby”ISDN Line Protocol = PPPDial Out Phone # = 5311PAP Password = “rubble”IP Address = 192.168.10.1IP Routing = enabledMake calls for IP data = enabledBridging = disabledDevice = “Alex”ISDN Line Protocol = PPPDial Out Phone # = 5411PAP Password = “stone”IP Address = 192.168.10.168IP Routing = enabledMake calls for IP data = enabledBridging = disabled
