Cabletron Systems CSX1200 User Manual

Also see for CyberSWITCH CSX1000: User guide Quick start

Contents

Workgroup Remote Access Switch 475SYSTEM M ESSAGESSystem Message SummarySSB: Post 28 i960lan_82596sx FAILUREThe i960 failed its LAN Coprocessor test. The boot process should continue; however, make note ofthe error message in the event of a future problem.SSB: Post 29 i960lan_82503 FAILUREThe i960 failed its LAN transceiver test. The boot process should continue; however, make note ofthe error message in the event of a future problem.SSB: Post 30 i960per_mod_mem_1 FAILUREThe i960 failed its peripheral buffer memory test using the first test pattern. The boot processshould continue; however, make note of the error message in the event of a future problem.SSB: Post 31 i960per_mod_mem_2 FAILUREThe i960 failed its peripheral buffer memory test using the second test pattern. The boot processshould continue; however, make note of the error message in the event of a future problem.SSB: Post 32 i960hdlc_1 FAILUREThe i960 failed its 80532 test using the first HDLC controller. The boot process should continue;however, make note of the error message in the event of a future problem.SSB: Post 33 i960hdlc_2 FAILUREThe i960 failed its 80532 test using the second HDLC controller. The boot process should continue;however, make note of the error message in the event of a future problem.SSB: Post 34 i960hdlc_3 FAILUREThe i960 failed its 80532 test using the third HDLC controller. The boot process should continue;however, make note of the error message in the event of a future problem.SSB: Post 35 i960hdlc_4 FAILUREThe i960 failed its 80532 test using the fourth HDLC controller. The boot process should continue;however, make note of the error message in the event of a future problem.SSB: Post 36 i960isdn_1 FAILURESSB: Post 37 i960isdn_2 FAILURESSB: Post 38 i960isdn_3 FAILURESSB: Post 39 i960isdn_4 FAILUREThe i960 failed its 2086 test using the first (second, third or fourth) D-channel controller The bootprocess should continue; however, make note of the error message in the event of a future problem.SSB: Timed out waiting for i960 to initialize for POSTSsThe i960 did not respond to an initialization request in a timely manner. This is a i960 failure. Theboot process should continue; however, make note of the error message in the event of a futureproblem.Starting Triggered RIP/SAP for This message indicates that triggered RIP/SAP has started for a device (either locally configuredor one present in the WAN peer list). Triggered RIP/SAP has been configured as a routing protocolfor this particular device.Stream Ready rejected - MTU too smallThe remote device will only accept the stream connection if the MTU is set to be > 1514. Check tomake sure that the remote device and the CyberSWITCH MTU value is set to > 1514.