| 
USER’S GUIDE500 CyberSWITCHOut - X25 DTE RR LCN , bytesThe DTE is acknowledging 1 or more data packets received from the DCE.Out - X25 Reset Ind LCN , bytesThe DCE is resetting a virtual circuit.Out - X25 Reset Request LCN , bytesThe DTE is resetting a virtual circuit.Out - X25 Restart Ind LCN , bytesThe DCE is resetting all virtual circuits.Out - X25 Restart Req LCN , bytesThe DTE is resetting all virtual circuits.X25 access in state for event Tracks the X.25 access as it is coming up or going down, defining the state it is in and the event thatis occurring.X.25 (LAPB) T RACE MESSAGESYou can trace X.25 Link Access Procedure Balanced (LAPB) incoming and outgoing packets. ThisLAPB trace information is placed into the Report log, which can be accessed by using thedrcommand. Enable this feature by using thetrace lapb on command, and disable it withtracelapb off.X.25 (LAPB) T RACE M ESSAGE SUMMARYIn - LAPB DISCThe DCE link layer is going off-line.In - LAPB DMThe DCE is going off-line.In - LAPB FRMRThe DCE has received an invalid frame.In - LAPB I Frame, Tx Sequence = , Rx Sequence = The DTE has received a data frame from the DCE.In - LAPB REJ, Rx Sequence = The DCE has detected a sequence error in the link layer.In - LAPB RNR, Rx Sequence = The DCE is not ready to receive more frames.In - LAPB RR, Rx Sequence = The DCE is acknowledging one or more frames from the DTE.In - LAPB SABMThe DCE is resetting the link layer. |
