USER’S GUIDE144 CyberSWITCHTACACS:with PINPAD SecureID Card1. Enter login Id (remote machine).2. Enter password onto SecurID card, which generates a dynamic password.3. Enter dynamic password onto remote machine’s password prompt.4. Press key when prompted for dynamic password.with non-PINPAD SecureID Card1. Enter login Id (remote machine).2. Enter password (remote machine).3. When prompted for a dynamic password, enter the dynamic password that is currentlydisplayed on your SecurID card onto your remote machine.ACE:with PINPAD SecureID Card1. Enter login Id (remote machine).2. You will be prompted for a passcode. To generate a passcode, enter your PIN onto theSecurID card. The SecurID card will then generate a passcode.3. Enter the SecureID passcode at the remote machine prompt.with non-PINPAD SecureID Card1. Enter login Id (remote machine).2. At the passcode prompt, enter your 4-digit PIN followed by the 6-digit dynamic passwordon your SecurID card. (This makes up your passcode).Note: Password (RADIUS) is an encrypted password value, 1 to 12 ASCII characters in length.Password or PIN (TACACS or ACE) is a personal identification number, 1 to 4 numericcharacters in length. Dynamic password or passcode is the 6-digit numeric value generatedby the SecurID card.D EVICE AND U SER L EVEL S ECURITYCONFIGURING DEVICE AND U SER L EVEL S ECURITYU SING CFGEDIT1. Select Device and User Level Security from the Security Level Menu. If you need guidance to findthis menu, refer to the instructions provided in the No Security configuration section.2. Refer to the chapters Configuring Device Level Databases and Configuring User Level Databases inorder to select and configure the device level database and the user level database.U SING M ANAGE M ODEseclevelDisplays the current security level configuration data.
