Cabletron Systems CSX1200 User Manual

Also see for CyberSWITCH CSX1000: User guide Quick start

Contents

USER’S GUIDE448 CyberSWITCHError reading platform type: couldn’t open file C:\SYSTEM\PLATFORM.NEIError reading platform type: error reading C:\SYSTEM\PLATFORM.NEIError reading platform type: there is no “plat name” fieldError reading platform type: there was no “=” in the stringError reading platform type: type value is too largeError reading platform type: type was not converted to an intThere is a problem with the platform.nei file. Reinstall the system Installation/Upgrade diskettesor CD-ROM.Error reading sdconf.rec fileAn error occurred during parsing of the ACE configuration file. The file was found, but did nothave the expected format. Either repeat the download of the file from the ACE server, or reenterthe ACE database location configuration and save changes using CFGEDIT.Error requesting slot activationContact your Distributor or Customer Support.Error sending message to Call ControlThe system detected a failure while sending a message to the WAN adapter. Restart the system andreview the resource configuration. If the error persists, contact your Distributor or CustomerSupport.Event occurred on FR Access , DLCI A debug message logged to indicate Frame Relay events occurring for the indicated DLCI on theindicated Access. The event is given in both textual, event, and numeric, code, forms.Facility not subscribed - Slot= Port=This probably indicates a SPID configuration error on the indicated line. The configuration shouldbe corrected on the system or the switch.Failed to allocate enough memory for XILINX load fileThe WAN card initialization subsystem failed to allocate a buffer for use in downloading files.Restart the system. If the problem continues, contact your Distributor or Customer Support.FAILED TO BOOT SYSTEM SOFTWAREWhile attempting to load the System software, an error was detected. The system will automaticallyreset and attempt a reboot in an effort to correct the problem. If the system continues to fail, makenote of the displayed messages, and contact your Distributor or Customer Support. A softwareupdate is likely needed.FAILED TO FORMAT RFAThe Flash File System could not be formatted. The system will automatically reset and attempt areboot in an effort to correct the problem. If the system continues to fail, make note of the displayedmessages, and contact your Distributor or Customer Support. A software update is likely needed.FAILED TO INSTALL XMODEM FILESET INTO FLASH MEMORYWhile writing a file into the Flash File System, an error was detected. The system will automaticallyreset and attempt a reboot in an effort to correct the problem. If the system continues to fail, makenote of the displayed messages, and contact your Distributor or Customer Support. A softwareupdate is likely needed.