Cabletron Systems CSX1200 User Manual

Also see for CyberSWITCH CSX1000: User guide Quick start

Contents

Workgroup Remote Access Switch 507R EMOTE M ANAGEMENTTelnetadministrator forgot to configure a static route on the remote site, System 2. Because System 2 is noton the same subnetwork as the Telnet client on System 1’s LAN, a static route is needed to allowSystem 2 to communicate with devices on Network 1. Because the CyberSWITCH had no Telnetclient capabilities in previous releases, the only way to fix the problem was to physically go to theremote site and add a static route.The second example network shown illustrates the current CyberSWITCH release. System 1 hasTelnet client capabilities, and therefore can simply Telnet to System 2 and add the needed staticroute.I NSTALLATION AND CONFIGURATIONTelnet is available by default when IP routing is enabled. No installation or configuration steps arerequired.Telnet Client(Sub) Network 1 (Sub) Network 2 (Sub) Network 3No route entryconfigured toNetwork 1"SITE2""SITE1"XCan not communicate"SITE1" "SITE2"Telnet Client(Sub) Network 1 (Sub) Network 2 (Sub) Network 3No route entryconfigured toNetwork 1Can fix configuration problemin SITE2 remotelythrough SITE1Remote SiteRemote SiteTelnet ClientCURRENT RELEASE:EARLIER RELEASES:ISDNISDNCSX1200CSX1200 CSX1200CSX1200CSX1200WORKGROUP REMOTE ACCESS SWITCHLAN10BASE-TRXTXSERVICE CH-2D-CHCH-1SYNCPOWERLINE1CH-2D-CHCH-1SYNCLINE2CH-2D-CHCH-1SYNCLINE3CH-2D-CHAGICH-1SYNCLINE4WORKGROUP REMOTE ACCESS SWITCHLAN10BASE-TRXTXSERVICE CH-2D-CHCH-1SYNCPOWERLINE1CH-2D-CHCH-1SYNCLINE2CH-2D-CHCH-1SYNCLINE3CH-2D-CHAGICH-1SYNCLINE4WORKGROUP REMOTE ACCESS SWITCHLAN10BASE-TRXTXSERVICE CH-2D-CHCH-1SYNCPOWERLINE1CH-2D-CHCH-1SYNCLINE2CH-2D-CHCH-1SYNCLINE3CH-2D-CHAGICH-1SYNCLINE4WORKGROUP REMOTE ACCESS SWITCHLAN10BASE-TRXTXSERVICE CH-2D-CHCH-1SYNCPOWERLINE1CH-2D-CHCH-1SYNCLINE2CH-2D-CHCH-1SYNCLINE3CH-2D-CHAGICH-1SYNCLINE4