Cabletron Systems CSX1200 User Manual

Also see for CyberSWITCH CSX1000: User guide Quick start

Contents

USER’S GUIDE38 CyberSWITCHThe CSX1001, shown below, is equivalent to the NE Link 1000 B2.P LATFORM D ESCRIPTIONThe NE Link 1000 and CSX1000 platforms consists of two processors (the 80386 EX and the 80960SA), system memory, and interface adapters. The front of the platforms have a series of LEDindicators. These indicators light up to indicate power, service, LAN access, and WAN access. Onthe back of the platform is the ON/OFF switch, connectors for power, the LAN, the WAN, and anadministration port for local or remote administration console attachment. There is a fan housed inthe rear of the platform, as well as side venting on the unit.The front panel has a series of indicators. The POWER indicator will remain lit while the unit is on.There are also LAN, WAN, and service indicators. For a more detailed description of each LEDindicator, refer to LED Indicators.The unit’s ON/OFF switch is located in the upper right corner of the back panel. Directly belowthis switch are the AC power input and fuse box. Note that the unit requires a 250V, 5 x 20 mm time-lag fuse rated at 1.6 amps. The back panel also provides connectors for WAN and LAN access, aswell an RS232 port for an administration console. The RS232 port is also available for PPP-Asyncdata transfer. The fan grill on the back panel, as well as the venting on the side panel, should notbe obstructed.BRI (Termination switches behind plate; see diagramFUSE TYPE: IEC 127/ III RATED F1.6AL-250VINPUT85-250V 47-63 - 1.6A MAXCONSOLE10Base-TAUICAUTIONFOR CONTINUED PROTECTIONAGAINST RISK OF FIRE,REPLACEONLY WITH SAME TYPE ANDRATING OF FUSE.!The CSX1001WORKGROUP REMOTE ACCESS SWITCHLAN10BASE-TRXTXSERVICE CH-2D-CHCH-1SYNCPOWERLINE1AGI