Cabletron Systems CSX1200 User Manual

Also see for CyberSWITCH CSX1000: User guide Quick start

Contents

Workgroup Remote Access Switch 181CONFIGURING O FF - NODE S ERVER I NFORMATIONRADIUS Authentication ServerU SING CFGEDIT1. Select option (2), RADIUS from the Off-node Server Information menu. If you need guidanceto find this menu, refer to the instructions provided in the VRA Manager Authentication Serverconfiguration section. The following screen will be displayed:2. Select (1) Primary Server to enter the following information:a. IP address of the Authentication Serverb. shared secret between the CyberSWITCH and Authentication Serverc. UDP port number used by the Authentication Server3. Optional: configure a secondary RADIUS Server with selection (2). In the event that theprimary server does not respond to system requests, the secondary server will be queried fordevice authentication information. The address and port number of the Secondary RADIUSServer must not be the same as the Primary RADIUS Server.4. Select Miscellaneous Information to finish the configuration. Specify the number of access requestretries that the system will send to the Authentication Server, as well as the time betweenretries.U SING M ANAGE M ODE C OMMANDSradiusDisplays the current RADIUS server configuration data.radius changeAllows you to change the current RADIUS server configuration data. After entering theradius change command, you will be prompted for the configuration elements you want tochange.RADIUS Authentication Server Menu:Primary ServerIP Address is 128.111.011.001Shared Secret is "SHAREDSECRET1234"UDP Port Number is 5800Secondary Serveris Not ConfiguredAccess Request RetryNumber of Access Retries is 5Time between Retries is 2 secondsRADIUS Server Options:1) Primary (Master) Server2) Secondary (Slave) Server3) Miscellaneous InformationSelect function from above or for previous menu: