Cabletron Systems CSX1200 User Manual

Also see for CyberSWITCH CSX1000: User guide Quick start

Contents

Workgroup Remote Access Switch 535S YSTEM COMMANDSCompression Information CommandsC OMPRESSION I NFORMATION C OMMANDSCompression statistics are only available for connections that are using a compression protocol.The following commands are used to display current compression information:cmp statsDisplays the compression statistics for all active connections. Refer to Compression Statistics, fora list of available compression statistics and their definitions.cmp stats name>Displays the compression statistics for the indicated device. Refer to Compression Statistics, fora list of available statistics and their definitions. Note that the device name is case sensitive.cmp clear name>Clears the compression statistics for the indicated device. If the device name is omitted, nocompression statistics will be cleared. Note that the device name is case sensitive.cmp clearallClears the compression statistics for all devices.DHCP C OMMANDSThese commands allow you to display or erase DHCP statistics.DHCP statsDisplays the DHCP statistics. For a listing of available statistics and their definitions, refer toDHCP Statistics.DHCP stats clearClears the DHCP statistics.ip addrpoolDisplays the current IP address pool. Refer to theip addrpool command description underIP Routing Commands.F RAME R ELAY C OMMANDSThe following commands are used to display information concerning both the status and trafficstatistics of a particular frame relay connection.fr a n>Sets an internal variable. The frame relay will be the assumed current access forall subsequent frame relay system console commands entered. will remain thecurrent access, until it is changed through issuing anotherfr a command. The is the access index that is assigned to each frame relay access during the frame relayaccess configuration.