Cabletron Systems CSX1200 User Manual

Also see for CyberSWITCH CSX1000: User guide Quick start

Contents

USER’S GUIDE94 CyberSWITCHdatalink addAllows you to add a data link. The following sample screen shows how a data link is added.datalink changeChanges an existing data link.datalink deleteDeletes an existing data link.ampconfAllows you to change the AMP port configuration.L INE CONFIGURATION ELEMENTSLINE NAMEA 1 to 16 user-defined character string (using all non-blank characters) that identifies the line. Eachline must have a unique name.LINE SLOTThe slot number assigned to the resource that will terminate this line.LINE PORTThe port number of the resource that will terminate this line.LINE INTERFACE T YPEFor basic rate lines only. Choice of point-to-point or point-multipoint. The point-to-point interfacetype is the type most often used in the U.S.; point-multipoint is most often used in Japan.A UTO TEIFor basic rate lines only.The default setting for automatic TEI negotiation is “yes”. For # 5ESS andDMS100 lines, you should not change the setting. For NTT point-to-point lines, you should disablethe automatic TEI negotiation by answering “no” to the prompt for this feature.Current LINE Configuration:id LINE NAME TYPE SLOT PORT--------------------------------------------------------------------------------1 LINE.BASICRATE1 BR_ISDN 1 12 LINE.BASICRATE2 BR_ISDN 1 23 DMS100.LINE1 BR_ISDN 2 1Select line id for new data link or press to cancel: 3Automatic TEI negotiation (Y or N) [default = Y]? NTEI value [default = 1]? Service Profile ID (enter 0 for no SPID)[default = NO SPID]? 13135551212Directory number [default = 13135551212]? 5551212Number of digits to verify [default = 7]? The DATALINK configuration has been updated successfully.