Output DescriptionTracked by Client that is tracking an object’s state; for example, VRRP.Example Dell# show track ipv6 routeTrack 2IPv6 route 2040::/64 metric thresholdMetric threshold is Up (STATIC/0/0)5 changes, last change 00:02:30Metric threshold down 255 up 254First-hop interface is TenGigabitEthernet 1/1/2/1Tracked by:VRRP TenGigabitEthernet 1/1/4/1 IPv6 VRID 1Track 3IPv6 route 2050::/64 reachabilityReachability is Up (STATIC)5 changes, last change 00:02:30First-hop interface is TenGigabitEthernet 1/1/2/1Tracked by:VRRP TenGigabitEthernet 1/1/4/1 IPv6 VRID 1Usage Command The following describes the show track ipv6 route brief command shown in the Example below.Ouput DescriptionResID Number of the tracked object.Resource Type of tracked object.Parameter Detailed description of the tracked object.State Up or Down state of the tracked object.Last Change Time since the last change in the state of the tracked object.Example (Brief) Dell# show track ipv6 route briefResId Resource Parameter State LastChange2 IPv6 route metric threshold 2040::/64 Up 00:02:363 IPv6 route reachability 2050::/64 Up 00:02:36Related Commands • show running-config track – display configuration information about tracked objects.• show track – display information about tracked objects, including configuration, current state, and clients whichtrack the object.• track interface ipv6 routing – configure object tracking on the routing status of an IPv6 Layer 3 interface.• track ipv6 route metric threshold – configure object tracking on the threshold of an IPv6 route metric.• track ipv6 route reachability – configure object tracking on the reachability of an IPv6 route.track interface ipv6 routingConfigure object tracking on the routing status of an IPv6 Layer 3 interface.Syntax track object-id interface interface ipv6 routingTo return to the default setting, use the no track object-id command.1060 Object Tracking
