Version Description9.7(0.0) Introduced on the S6000–ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.1.1.0 Introduced on the E-Series.7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to16 characters long.7.6.1.0 Introduced on the S-Series.7.5.1.0 Introduced on the C-Series.pre-6.1.1.0 Introduced on the E-Series.Usage Information The community list used in the set comm-list delete command must be configured so that each filtercontains only one community. For example, the filter deny 100:12 is acceptable, but the filter deny 120:13140:33 results in an error.If the set comm-list delete command and the set community command are configured in the sameroute map sequence, the deletion command (set comm-list delete) is processed before the insertioncommand (set community).Related Commands • match community — redistribute routes that match the COMMUNITY attribute.• set community — specify a COMMUNITY attribute.set communityAllows you to assign a BGP COMMUNITY attribute.Syntax set community {community-number | local-as | no-advertise | no-export | none}[additive]To delete a BGP COMMUNITY attribute assignment, use the no set community {community-number |local-as | no-advertise | no-export | none} command.Parameters community-number Enter the community number in AA:NN format where AA is the AS number (2 bytes) andNN is a value specific to that autonomous system.local-AS Enter the keywords local-AS to drop all routes with the COMMUNITY attribute ofNO_EXPORT_SUBCONFED.All routes with the NO_EXPORT_SUBCONFED (0xFFFFFF03) community attribute mustnot be advertised to external BGP peers.no-advertise Enter the keywords no-advertise to drop all routes containing the well-knowncommunity attribute of NO_ADVERTISE.276 Access Control Lists (ACL)
