• show lldp neighbors — display the LLDP neighbors.advertise med location-identificationTo advertise a location identifier, configure the system.Syntax advertise med location-identification {coordinate-based value | civic-basedvalue | ecs-elin value}To return to the default, use the no advertise med location-identification {coordinate-based value | civic-based value | ecs-elin value} command.Parameters coordinate-basedvalueEnter the keywords coordinate-based then the coordinated based location inhexadecimal value of 16 bytes.civic-based value Enter the keywords civic-based then the civic based location in hexadecimal format.The range is from 6 to 255 bytes.ecs-elin value Enter the keywords ecs-elin then the Emergency Call Service (ecs) EmergencyLocation Identification Number (elin) numeric location string. The range is from 10 to 25characters.Defaults Unconfigured.Command Modes CONFIGURATION (conf-lldp)Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100–ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.7.1.0 Introduced on the S-Series.7.6.1.0 Introduced on the C-Series and E-Series.Link Layer Discovery Protocol (LLDP) 971
