ip ospf priorityTo determine the designated router for the OSPF network, set the priority of the interface.Syntax ip ospf priority numberTo return to the default setting, use the no ip ospf priority command.Parameters number Enter a number as the priority. The range is from 0 to 255. The default is 1.Defaults 1Command Modes INTERFACECommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100-ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.6.1.0 Introduced on the S-Series.7.5.1.0 Introduced on the C-Series.pre- 6.1.1.1 Introduced on the E-Series.Usage Information Setting a priority of 0 makes the router ineligible for election as a designated router or backup designated router.Use this command for interfaces connected to multi-access networks, not point-to-point networks.Open Shortest Path First (OSPFv2 and OSPFv3) 1097
