Version Description9.11(0.0) Introduced the static mode on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON,S6100–ON, and Z9100–ON.9.10(0.0) Introduced on the S6100–ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0) Introduced on the S4048–ON.9.7(0.0) Introduced on the S6000-ON.9.4(0.0) Introduced on the S6000.Example Dell# show vxlan vxlan-instance <1> unicast-mac-remoteTotal Local Mac Count: 1VNI MAC TUNNEL4656 00:00:01:00:00:01 36.1.1.1Related Commands vxlan-instance- Enable VXLAN Instance configuration on the platform.show vxlan vxlan-instance vtep-vni-mapDisplays information on VTEP to VNI mapping for a specific remote VTEP or all remote VTEPsSyntax show vxlan vxlan-instance instance ID vtep-vni-map remote-vtep-ip IP-AddressParameters instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initialrelease.remote-vtep-ip Enter the keyword remote-vtep-ip followed by the IP address of the remote VTEP.Command Modes • EXEC• EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, refer to the relevant DellNetworking OS Command Line Reference Guide.Version Description9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, andZ9100–ON.Example Dell# show vxlan 1 vtep-vni-mapRemote Vtep IP : 10.10.10.10VNI profile : Profile1VNID count : 4VNID list : 100, 200, 300, 400Remote Vtep IP : 10.10.10.11VNI profile : Profile2VNID count : 3VNID list : 100, 200, 5001706 Virtual Extensible LAN (VXLAN)
