Version Description9.1(0.0) Introduced on S4810 and Z9000.8.3.19.0 Introduced on S4820T.Usage Information Include the colon (:) when entering this command. This command checks the specified flash memory for errors. Iferrors are found, the command recommends that you format the flash.CAUTION: If you elect to format the flash, all files – including the startup configuration file – are lost. Ifyou do decide to format the specified flash, consider saving the running configuration as the startupconfiguration after formatting the flash (use the write memory command or copy running-config startup-config command).Related Commands • copy — copy one file to another location.• show file-systems — display information about the file systems on the system.mkdirCreates a directory on the NFS mounted file system.Syntax mkdir nfsmount://mount-point/usrnameCommand Modes CONFIGURATIONCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S-Series.Example Dell# mkdir nfsmount:/nfs-mountpoint/guestDell#Related Commands • rmdir — remove a directory.mount nfsMounts an NFS file system to a device.Syntax mount nfs rhost:path mount-point [username password]Parameters Enter the following location keywords and information:rhost:path Enter the remote hosts’s path directory.File Management 67
