To disable packet forwarding over multiple paths, use the no maximum-paths command.Parameters number Specify the number of paths. The range for OSPFv2 is from 1 to 64. The default forOSPFv2 is 4 paths. The range for OSPFv3 is from 1 to 64. The default for OSPFv3 is 8paths.Defaults 4Command Modes ROUTER OSPF for OSPFv2ROUTER OSPFv3 for OSPFv3Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100-ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.9.1(0.0) Introduced support for OSPFv3 on the S4810 and Z9000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.8.1.0 Added support for Multi-Process OSPF.7.6.1.0 Introduced on the S-Series.7.5.1.0 Introduced on the C-Series.pre- 6.1.1.1 Introduced on the E-Series.mib-bindingEnable this OSPF process ID to manage the SNMP traps and process SNMP queries.Syntax mib-bindingTo mib-binding on this OSPF process, use the no mib-binding command.Defaults none.Open Shortest Path First (OSPFv2 and OSPFv3) 1101
