show crypto ipsec policyDisplay the configuration of IPsec authentication and encryption policies.Syntax show crypto ipsec policy [name name]Parameters name name (OPTIONAL) Displays configuration details about a specified policy.Defaults No default behavior or values.Command Modes EXECEXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100-ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.2(1.0) Introduced on the Z9500.9.1.(0.0) Introduced on the S4810 and Z9000.8.4.2.0 Introduced on the E-Series.8.3.19.0 Introduced on the S4820T.Usage Information The show crypto ipsec policy command output displays the AH and ESP parameters configured in IPsecsecurity policies, including the SPI number, keys, and algorithms used.When configured in a helper-reject role, an OSPFv3 router ignores the Grace LSAs that it receives from arestarting OSPFv3 neighbor.Related Commands show crypto ipsec sa ipv6– displays the IPsec security associations used on OSPFv3 interfaces.Example Dell# show crypto ipsec policyCrypto IPSec client security policy dataPolicy name : OSPFv3-1-502Policy refcount : 1Inbound ESP SPI : 502 (0x1F6)Outbound ESP SPI : 502 (0x1F6)Inbound ESP Auth Key : 123456789a123456789b123456789c12Outbound ESP Auth Key : 123456789a123456789b123456789c121176 Open Shortest Path First (OSPFv2 and OSPFv3)
