Version Description8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.1.1.0 Introduced on the E-Series.7.8.1.0 Introduced on the S-Series.Usage Information This command re-applies the RP mapping logic for all the groups learnt by the node. Any stale informationcorresponding to the existing mapping configuration is updated. The existing BSR cache and the *,G's are deletedonly if these entries are stale.clear ip pim tibClear PIM tree information from the PIM database.Syntax clear ip pim [vrf vrf-name] tib [group]Parameters vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to configure thissetting on that VRF.NOTE: Applies to specific VRF if input is provided, else applies to DefaultVRF.group (OPTIONAL) Enter the multicast group address in dotted decimal format (A.B.C.D).Command Modes EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100-ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Added support for VRF. Introduced on the S6000-ON.9.5(0.1) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.1.1.0 Introduced on the E-Series.PIM-Sparse Mode (PIM-SM) 1199
