show ipv6 routeDisplays the IPv6 routes.Syntax show ipv6 route [ipv6-address prefix-length] [vrf vrf-name] [hostname] [all][bgp as number] [connected] [isis tag] [list prefix-list name] [ospf process-id] [rip] [static] [summary]Parameters ipv6-address prefix-length(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prefix length inthe /x format. The range is from /0 to /128.NOTE: The :: notation specifies successive hexadecimal fields of zeros.vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to display IPv6 routescorresponding to that VRF.NOTE: If you do not specify this option, routes corresponding to the defaultVRF are displayed.hostname (OPTIONAL) View information for this IPv6 routes with Host Name.all (OPTIONAL) View information for all IPv6 routes.bgp (OPTIONAL) View information for all IPv6 BGP routes.connected (OPTIONAL) View only the directly connected IPv6 routes.isis (OPTIONAL) View information for all IPv6 IS-IS routes.list (OPTIONAL) View the IPv6 prefix list.ospf (OPTIONAL) View information for all IPv6 OSPF routes.rip (OPTIONAL for E-Series only) View information for all IPv6 RIP routes.static (OPTIONAL) View only routes configured by the ipv6 route command.summary (OPTIONAL) View a brief list of the configured IPv6 routes.Defaults noneCommand Modes • EXEC• EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100–ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.IPv6 Basics 821
