advertise med guest-voiceTo advertise a separate limited voice service for a guest user with their own IP telephony handset or other appliances that supportinteractive voice services, configure the system.Syntax advertise med guest-voice {vlan-id layer2_priority DSCP_value} | {priority-tagged number}To return to the default, use the no advertise med guest-voice {vlan-id layer2_priorityDSCP_value} | {priority-tagged number} command.Parameters vlan-id Enter the VLAN ID. The range is from 1 to 4094.layer2_priority Enter the Layer 2 priority. The range is from 0 to 7.DSCP_value Enter the DSCP value. The range is from 0 to 63.priority-taggednumberEnter the keywords priority-tagged, the Layer 2 priority, and then the DSCP value.Defaults Unconfigured.Command Modes CONFIGURATION (conf-lldp)Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100–ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.7.1.0 Introduced on the S-Series.7.6.1.0 Introduced on the C-Series and E-Series.Related Commands • protocol lldp (Configuration) — enable LLDP globally.• debug lldp interface — debug LLDP.Link Layer Discovery Protocol (LLDP) 969
