Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100–ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.10.0 Added the ingress-port parameter for the S4810.8.3.7.0 Introduced on the S4810.7.6.1.0 Introduced on the S-Series.7.5.1.0 Introduced on the C-Series.Usage Information By default, Dell Networking OS distributes incoming traffic based on a hash algorithm using the following criteria:• IP source address• IP destination address• TCP/UDP source port• TCP/UDP destination portload-balance hgChoose the traffic flow parameters the hash calculation uses while distributing the traffic across internal higig links.Syntax [no] load-balance hg {ip-selection | ipv6-selection [source-ip | source-ipv6 |source-port-id | source-module-id | dest-ip | dest-ipv6 | dest-port-id | dest-module-id | protocol | vlan | L4-source-port | L4-dest-port ] | mac [source-mac| source-port-id | source-module-id | dest-mac | dest-port-id | dest-module-id| vlan | ethertype | source-dest-mac ] | tunnel [ipv4-over-ipv4 | ipv4-over-gre-ipv4 | mac-in-mac]}Parameters {{ip-selection| ipv6-selection [source-ip| source-ipv6 |source-port-id |source-module-id |dest-ip | dest-ipv6 |dest-port-id | dest-module-id | protocol| vlan | L4-source-To use IPv4 key fields in hash computation, enter the keyword ip-selection then oneof the parameters. To use IPv6 key fields in hash computation, enter the keyword ipv6-selection then one of the parameters.• source-ip — Use IPv4 src-ip field in hash calculation.• source-ipv6 — Use IPv6 src-ip field in hash calculation• source-port-id — Use src-port-id field in hash calculation.• source-module-id — Use src-module-id field in hash calculation.• dest-ip — Use IPv4 dest-ip field in hash calculation.• dest-ipv6 — Use IPv6 dest-ip field in hash calculationIPv4 Routing 781
