Version Description9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.3.1.0 Introduced on the C-Series and S-Series.Usage Information Enable DEI before using this command.dei markSet the DEI value on egress according to the color currently assigned to the packet.Syntax dei mark {green | yellow} {0 | 1}Parameters 0 | 1 Enter the bit value you want to map to a color.green | red | yellow Choose a color:• Green: High priority packets that are the least preferred to be dropped.• Yellow: Lower priority packets that are treated as best-effort.Defaults All the packets on egress are marked with DEI 0.Command Modes INTERFACECommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100–ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.1640 VLAN Stacking
