Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.6.5.1.0 Introducedaggregate-addressTo minimize the number of entries in the routing table, summarize a range of prefixes.Syntax aggregate-address ip-address mask [advertise-map map-name] [as-set] [attribute-map map-name] [summary-only] [suppress-map map-name]Parameters ip-address mask Enter the IP address and mask of the route to be the aggregate address. Enter the IPaddress in dotted decimal format (A.B.C.D) and mask in /prefix format (/x).advertise-mapmap-name(OPTIONAL) Enter the keywords advertise-map then the name of a configured routemap to set filters for advertising an aggregate route.as-set (OPTIONAL) Enter the keyword as-set to generate path attribute information andinclude it in the aggregate.AS_SET includes AS_PATH and community information from the routes included in theaggregated route.attribute-map map-name(OPTIONAL) Enter the keywords attribute-map then the name of a configured routemap to modify attributes of the aggregate, excluding AS_PATH and NEXT_HOPattributes.summary-only (OPTIONAL) Enter the keyword summary-only to advertise only the aggregateaddress. Specific routes are not advertised.suppress-map map-name(OPTIONAL) Enter the keywords suppress-map then the name of a configured routemap to identify which more-specific routes in the aggregate are suppressed.Defaults Not configured.Command Modes • ROUTER BGP ADDRESS FAMILYBorder Gateway Protocol 339
