clear storm-control pfc statisticsClears the discard state count and cleared count statistics. If the queue is in discard state during clear, the discard state count will startfrom 1.Syntax clear storm-control pfc statistics stack-unit {unit-number} port-set {portpipe-number}Parameters unit-number Enter the stack unit number.portpipe-number Enter the port set number.Defaults NoneCommand Modes EXEC Privilege.Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.11(0.0) Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.Usage Information The clear storm-control pfc statistics command is used to clear the discard count and clearedcount statistics on the specified stack unit and port set.Related Commands show storm-control pfc statistics — used to view the statistical data of the PFC storm on the specified stack unitand the port set.show storm-control broadcastDisplay the storm control broadcast configuration.Syntax show storm-control broadcast [interface]Parameters interface (OPTIONAL) Enter one of the following interfaces to display the interface-specific stormcontrol configuration:• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet thenthe stack/slot/port/subport information.• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then thestack/slot/port/subport information.• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/slot/port[/subport] information.• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/slot/port/subport information.• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then thestack/slot/port information.Defaults noneCommand Modes • EXEC1554 Storm Control
