n - network, D - denied, S - staleOrigin codes: i - IGP, e - EGP, ? - incompleteNetwork Next Hop Metric LocPrf Weight Path*> 55.0.0.0/24 172.16.0.2 0 200 i*> 66.0.0.0/24 172.16.0.2 0 200 iAll the show and debugs commands display the link band width extended-community prefixed with DMZ-Link-bwalong with other extended communities.Dell# show ip bgp 3.3.3.0/24BGP routing table entry for 3.3.3.0/24Paths: (1 available, table Default-IP-Routing-Table.)Not advertised to any peerReceived from :1.1.1.2 (3.3.3.1) BestAS_PATH :Next-Hop : 1.1.1.2, Cost : 0Origin IGP, Metric 0, LocalPref 100, Weight 0, internalExtended Communities :DMZ-Link Bw: 2000 kbytes*Related Commands • show ip bgp community — view the BGP communities.• neighbor maximum-prefix — control the number of network prefixes received.show ip bgp cluster-listView BGP neighbors in a specific cluster.Syntax show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6 unicast] cluster-list [cluster-id]Parameters vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the VRF to view clusterinformation of BGP neighbors corresponding to that VRF.ipv4 multicast (OPTIONAL) Enter the keywords ipv4 followed by the keyword multicast to viewinformation related only to ipv4 multicast routes.ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword unicast to viewinformation related only to ipv4 multicast routes.ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to viewinformation related to only to the ipv6 unicast routes.cluster-id (OPTIONAL) Enter the cluster id in dotted decimal format. The range is 1 —4294967295.Command Modes • EXEC• EXEC PrivilegeBorder Gateway Protocol 417
