Version Description8.2.1.0 Policy name character limit increased from 16 to 32.7.6.1.0 Introduced on the C-Series and S-Series.6.1.1.1 Introduced on the E-Series.Usage Information Use this command to specify the name of the output QoS policy. Once output policy is specified, rate-shape,scheduler strict, bandwidth-percentage, and WRED can be defined. This command enables the qos-policy-outputconfiguration mode—(conf-qos-policy-out).Related Commands • bandwidth-percentage — assigns percentage of bandwidth to the class/queue.• wred — assigns yellow or green drop precedence.rate-policeSpecify the policing functionality on incoming traffic.Syntax rate-police [kbps] committed-rate [burst-KB] [peak [kbps] peak-rate [burst-KB]]Parameters kbps Enter the keyword kbps to specify the rate limit in Kilobits per second (Kbps). Make thefollowing value a multiple of 64. The range is from 0 to 100000000. The defaultgranularity is Megabits per second (Mbps).committed-rate Enter the bandwidth in Mbps. The range is from 0 to 40000.burst-KB (OPTIONAL) Enter the burst size in KB. The range is from 16 to 200000. The default is100.peak peak-rate (OPTIONAL) Enter the keyword peak then a number to specify the peak rate in Mbps.The range is from 0 to 40000. The default is the same as designated for committed-rate.Defaults Burst size is 100KB. peak-rate is by default the same as committed-rate. Granularity for committed-rate and peak-rate is Mbps unless you use the kbps option.Command Modes QOS-POLICY-INCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100-ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.Quality of Service (QoS) 1281
