Version Description9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.8.1.0 Introduced on the S-Series.7.6.1.0 Introduced on the C-Series.pre- 6.2.1.1 Introduced on the E-Series.Related Commands • default-metric — assigns one distance metric to all routes learned using the redistribute command.distribute-list inConfigure a filter for incoming routing updates.Syntax distribute-list prefix-list-name in [interface]To delete the filter, use the no distribute-list prefix-list-name in command.Parameters prefix-list-name Enter the name of a configured prefix list.interface (OPTIONAL) Identifies the interface type slot/port as one of the following:• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet thenthe stack/slot/port/subport information.• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then thestack/slot/port/subport information.• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/slot/port[/subport] information.• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/slot/port/subport information.• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then thestack/slot/port information.• For a Port Channel interface, enter the keywords port-channel then a number.• For a VLAN, enter the keyword vlan then a number from 1 to 4094.Defaults Not configured.Routing Information Protocol (RIP) 1323
