• the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs• the default destination (0.0.0.0) for Type 5 LSAsadv-router ip-address(OPTIONAL) Enter the keywords adv-router then the IP address of an AdvertisingRouter to display only the LSA information about that router.Command Modes • EXEC• EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100-ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.8.1.0 Added support for Multi-Process OSPF.7.6.1.0 Introduced on the S-Series.7.5.1.0 Introduced on the C-Series.pre-6.1.1.1 Introduced on the E-Series.Related Commands • show ip ospf database — display OSPF database information.show ip ospf database routerDisplay the router (type 1) LSA information.Syntax show ip ospf [process-id | vrf vrf-name ] database router [link-state-id] [adv-router ip-address]Parameters process-id Enter the OSPF Process ID to show a specific process. If no Process ID is entered,command applies only to the first OSPF process.1128 Open Shortest Path First (OSPFv2 and OSPFv3)
