225.0.0.4 Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51Example (Details) Dell# show ip igmp group detailsInterface Vlan 20Group 232.1.1.5Uptime 00:11:22Expires NeverRouter mode INCLUDELast reporter 35.0.0.2Group source listSource address Expires65.0.0.1 00:01:2265.0.0.2 00:01:2265.0.0.3 00:01:2265.0.0.4 00:01:2265.0.0.5 00:01:22show ip igmp interfaceView information on the interfaces participating in IGMP.Syntax show ip igmp [vrf vrf-name] interface [interface]Parameters vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to view IGMPinterfaces associated with that VRF.interface (OPTIONAL) Enter the interface type and the interface information:• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet thenthe stack/slot/port/subport information.• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then thestack/slot/port/subport information.• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/slot/port[/subport] information.• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/slot/port/subport information.• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then thestack/slot/port information.• For a Loopback interface, enter the keyword loopback then a number from 0 to16383.• For a port channel interface, enter the keywords port-channel then a number.• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.Command Modes • EXEC• EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Internet Group Management Protocol (IGMP) 649