Version Description9.8(1.0) Introduced on the Z9100-ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.2.1.0 Introduced S-Series Stacking.8.1.1.0 Introduced on the E-Series.7.7.1.0 Introduced on the S-Series.7.6.1.0 Introduced on the C-Series.6.2.1.1 Introduced on the E-Series.Usage Information sFlow is disabled by default. In addition to this command, sFlow needs to be enable on individual interfaces wheresFlow sampling is desired.Related Commands • sflow enable (Interface) — enable sFlow on interfaces.sflow ingress-enableEnable sFlow ingress on interfaces.Syntax sflow ingress-enableTo disable sFlow, use the no sflow ingress enable command.Defaults Disabled.Command Modes INTERFACECommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100-ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.7(0.0) Introduced on the S-Series, Z-Series, and MXL switch.sFlow 1485
