dot1x quiet-periodSet the number of seconds that the authenticator remains quiet after a failed authentication with a client.Syntax dot1x quiet-period secondsTo disable quiet time, use the no dot1x quiet-time command.Parameters seconds Enter the number of seconds. The range is from 1 to 65535. The default is 60.Defaults 60 secondsCommand Modes INTERFACECommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000–ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.9.0.0.0 Introduced on the Z9000.8.3.19.0 Introduced on the S4820T.8.3.12.0 Introduced on the S4810.7.6.1.0 Introduced on the C-Series and S-Series.7.4.1.0 Introduced on the E-Series.dot1x reauthenticationEnable periodic reauthentication of the client.Syntax dot1x reauthentication [interval seconds]To disable periodic reauthentication, use the no dot1x reauthentication command.Parameters interval seconds (Optional) Enter the keyword interval then the interval time, in seconds, after whichreauthentication is initiated. The range is from 1 to 31536000 (one year). The default is3600 (1 hour).Defaults 3600 seconds (1 hour)168 802.1X
