graceful-restart t3Configure the overall wait time before graceful restart completes.Syntax graceful-restart t3 {adjacency | manual} secondsTo return to the default, use the no graceful-restart t3 command.Parameters adjacency Enter the keyword adjacency so that the restarting router receives the remaining timevalue from its peer and adjusts its T3 value so if you have configured this option.manual Enter the keyword manual to specify a time value that the restarting router uses. Therange is from 50 to 120 seconds. The default is 30 seconds.Defaults manual, 30 secondsCommand Modes ROUTER ISISCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100–ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.5(0.1) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.12.0 Introduced on the S4810.8.3.11.1 Introduced on the Z9000.8.3.1.0 Introduced on the E-Series.Usage Information The running router sets the remaining time value to the current adjacency hold time. You can override this settingby implementing this command.Override the default restart-wait time by entering the no graceful-restart restart-wait command.When you disable restart-wait, the current adjacency hold time is used.Set the t3 timer to adjacency on the restarting router when implementing this command. The restarting routergets the remaining time value from its peer and adjusts its T3 value so only when you have configured graceful-restart t3 adjacency.Related Commands • graceful-restart restart-wait — enable the graceful restart maximum wait time before a restarting peer comesup.858 Intermediate System to Intermediate System (IS-IS)
