ip ospf retransmit-intervalSet the retransmission time between lost link state advertisements (LSAs) for adjacencies belonging to the interface.Syntax ip ospf retransmit-interval secondsTo return to the default values, use the no ip ospf retransmit-interval command.Parameters seconds Enter the number of seconds as the interval between retransmission. The range is from 1to 3600. The default is 5 seconds.This interval must be greater than the expected round-trip time for a packet to travelbetween two routers.Defaults 5 secondsCommand Modes INTERFACECommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100-ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.6.1.0 Introduced on the S-Series.7.5.1.0 Introduced on the C-Series.pre- 6.1.1.1 Introduced on the E-Series.Usage Information Set the time interval to a number large enough to prevent unnecessary retransmissions.1098 Open Shortest Path First (OSPFv2 and OSPFv3)
