Usage Information To specify a distance for routes learned from other routing domains, use the redistribute command.distribute-list inApply a filter to incoming routing updates from OSPF to the routing table.Syntax distribute-list prefix-list-name in [interface]To delete a filter, use the no distribute-list prefix-list-name in [interface] command.Parameters prefix-list-name Enter the name of a configured prefix list.interface (OPTIONAL) Enter one of the following keywords and slot/port or number information:• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet thenthe stack/slot/port/subport information.• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then thestack/slot/port/subport information.• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/slot/port[/subport] information.• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/slot/port/subport information.• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then thestack/slot/port information.• For Port Channel groups, enter the keywords port-channel then a number.• For a VLAN, enter the keyword vlan then a number from 1 to 4094.Defaults Not configured.Command Modes ROUTER OSPFCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100-ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.Open Shortest Path First (OSPFv2 and OSPFv3) 1081
