show ip management-routeView the IP addresses assigned to the Management interface.Syntax show ip management-route [all | connected | summary | static]Parameters all (OPTIONAL) Enter the keyword all to view all IP addresses assigned to all Managementinterfaces on the switch.connected (OPTIONAL) Enter the keyword connected to view only routes directly connected tothe Management interface.summary (OPTIONAL) Enter the keyword summary to view a table listing the number of activeand non-active routes and their sources.static (OPTIONAL) Enter the keyword static to view non-active routes also.Command Modes • EXEC• EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100–ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.1.1.0 Introduced on the E-Series.7.5.1.0 Introduced on the C-Series.pre-6.1.1.0 Introduced on the E-Series.Example Dell# show ip management-routeDestination Gateway State----------- ------- -----10.1.2.0/24 ManagementEthernet 1/1 Connected798 IPv4 Routing
