Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.11.1 Introduced on the Z9000.8.1.1.0 Introduced on the E-Series.7.6.1.0 Introduced on the S-Series.7.5.1.0 Introduced on the C-Series.6.1.1.0 Introduced on the E-Series.Related Commands • ip ssh server — enables the secure shell (SSH) server on the system.ip telnet server vrfConfigures the TELNET server on either a specific VRF or a management VRF.Syntax ip telnet server vrf {vrf-name | any | management}To undo the TELNET server configuration, use the no ip telnet server [vrf vrf-name] command.Parameters vrf-name Enter the vrf-name to specify the VRF that is used by the TELNET server.any Enter the keyword any to enable server from any VRF.management Enter the keyword management to specify a management VRF that is used by theTELNET server.Defaults DisabledCommand Modes CONFIGURATIONCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100–ON.108 Control and Monitoring
