9.10(0.0) Introduced on the S6100–ON.9.8(1.0) Introduced on the Z9100–ON.9.0.2.0 Introduced on the S6000.8.4.2.1 Introduced on the E-Series TeraScale and S-Series.8.2.1.0 Introduced on the E-Series ExaScale.7.8.1.0 Introduced on the C-Series.7.4.1.0 Added the monitor option.Related Commands deny – configures a filter to drop packets.permit – configures a filter to forward packets.Common MAC Access List CommandsThe following commands are available within both MAC ACL modes (Standard and Extended) and do not have mode-specific options.These commands allow you to clear, display, and assign MAC ACL configurations.The platform supports both Ingress and Egress MAC ACLs.The MAC ACL can be applied on Physical, Port-channel and VLAN interfaces. As per the specified rules in the ACL, the traffic on theinterface/ VLAN members or Port-channel members will be permitted or denied.clear counters mac access-groupClear counters for all or a specific MAC ACL.Syntax clear counters mac access-group [mac-list-name]Parameters mac-list-name (OPTIONAL) Enter the name of a configured MAC access list.Command Modes EXEC PrivilegeCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000–ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.238 Access Control Lists (ACL)
