portpipe-number Enter the port set number.Defaults NoneCommand Modes EXEC Privilege.Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS CommaLine Reference Guide.Version Description9.10(0.0) Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.Usage Information The show storm-control pfc status command is used to view the status of the PFC storm on the specified stack uand the port set.Example Dell#show storm-control pfc status stack-unit 1 port-set 0-------------------------------------------------------------------------------------------------------Interface Priority State Duration in discard state(in ms) Pkts Dropped(Ingress) Pkts Dropped(Egress) PktsDropped(Ingress,Cumulative) PktsDropped(Egress,Cumulative)---------------------------------------------------------------------------------------------------Fo 1/32/1 4 Drop 1194740 2389 1357592185882389 135759218588Fo 1/1/1 4 Normal 0 0 00 0Fo 1/17/1 4 Normal 0 0 00 0clear storm-control pfc drop-countersClears all the ingress & egress drop counters and time since discard. The counters are reset and started afresh from 0.Syntax clear storm-control pfc drop-counters stack-unit {unit-number} port-set{portpipe-number}Parameters unit-number Enter the stack unit number.portpipe-number Enter the port set number.Defaults NoneCommand Modes EXEC Privilege.Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.11(0.0) Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.Usage Information The clear storm-control pfc drop-counters command is used to clears all the ingress & egress dropcounters and time since discard on the specified stack unit and port set.Related Commands show storm-control pfc status — view the status of the PFC storm on a stack unit with a specific port set.1552 Storm Control
