Version Description9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.8.3.1.0 Introduced.Usage Information By default, when rate policing and shaping, the system does not include the Preamble, SFD, or the IFG fields.These fields are overhead; only the fields from MAC destination address to the CRC are used for forwarding andare included in these rate metering calculations.service-class bandwidth-percentageSpecify a minimum bandwidth for queues.Syntax service-class bandwidth-percentage queue0 number queue1 number queue2 numberqueue3 number queue4 number queue5 number queue6 number queue7 numberParameters number Enter the bandwidth-weight, as a percentage.Defaults noneCommand Modes CONFIGURATIONCommand History Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.1 Introduced on the S4810.8.2.1.0 Introduced on the C-Series and S-Series.Usage Information Guarantee a minimum bandwidth to different queues globally using the service-class bandwidth-percentage command from CONFIGURATION mode. The command is applied in the same way as thebandwidth-percentage command in an output QoS policy. The bandwidth-percentage command inQOS-POLICY-OUT mode supersedes the service-class bandwidth-percentage command.Quality of Service (QoS) 1257
