Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000–ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.8.1.0 Introduced on the S-Series.7.7.1.0 Introduced on the C-Series.Example Dell(conf-router_bgp)# show config!router bgp 100network 1.1.11.1/32network 1.1.12.1/32network 1.1.13.1/32neighbor 10.1.1.2 remote-as 200neighbor 10.1.1.2 no shutdownDell(conf-router_bgp)#show ip bgpView the current BGP IPv4 routing table for the system.Syntax show ip bgp [vrf vrf-name] [ipv4 unicast] [network [network-mask] [longer-prefixes]]Parameters ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view information only related toipv4 unicast routes.network (OPTIONAL) Enter the network address (in dotted decimal format) of the BGP networkto view information only on that network.network-mask (OPTIONAL) Enter the network mask (in slash prefix format) of the BGP networkaddress.longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a commonprefix.Border Gateway Protocol 415
