mac-address Enter the 48-bit hexadecimal address in nn:nn:nn:nn:nn:nn format.vlan-range Enter the VLAN IDs in which proxy gateway is not needed. The VLANs are excluded fromdoing proxy gateway. The value can be a single VLAN ID, comma-separated VLAN IDs, arange of VLAN IDs, or a combination. For example:Comma-separated: 3, 4, 6Range: 5-10Combination: 3, 4, 5-10, 8Command Modes VLT DOMAIN PROXY GW STATICCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100–ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.Usage Information You can configure the MAC address of a VLT peer in a remote VLT domain to associate with the static VLT proxygateway and exclude a VLAN, or a range of VLANs, from proxy routing.Example Dell(conf)# vlt-domain 1Dell(conf-vlt-domain#proxy-gateway staticDell(conf-vlt-domain-proxy-gw-static)# remote-mac-address 00:01:e8:06:95:acexclude-vlan 3Dell(conf-vlt-domain-proxy-gw-static)#peer-domain-link port-channel exclude-vlanConfigure the VLT port channel, which is connected to the remote VLT domain, for the proxy gateway or configure the VLANs you want toexclude from VLT proxy gateway.Syntax [no] peer-domain-link port-channel interface-identifier exclude-vlan vlan-rangeParameters port-channel Configure the proxy-gateway interface port-channel.interface-identifier Enter the interface type.1664 VLT Proxy Gateway
