distanceDefine an administrative distance for particular routes to a specific IP address.Syntax distance weight [ip-address mask access-list-name]To delete the settings, use the no distance weight [ip-address mask access-list-name]command.Parameters weight Specify an administrative distance. The range is from 1 to 255. The default is 110.ip-address (OPTIONAL) Enter a router ID in the dotted decimal format. If you enter a router ID,include the mask for that router address.mask (OPTIONAL) Enter a mask in dotted decimal format or /n format.access-list-name (OPTIONAL) Enter the name of an IP standard access list, up to 140 characters.Defaults 110Command Modes ROUTER OSPFCommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100-ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.7.0 Introduced on the S4810.7.8.1.0 Added support for the Multi-Process OSPF.7.6.1.0 Introduced on the S-Series.7.5.1.0 Introduced on the C-Series.pre- 6.1.1.1 Introduced on the E-Series.Open Shortest Path First (OSPFv2 and OSPFv3) 1079
