thresholdSpecify the minimum and maximum threshold values for the configured WRED profiles.Syntax threshold min number max number max-drop-dropTo remove the threshold values, use the no threshold min number max number command.Parameters min number Enter the keyword min then the minimum threshold number for the WRED profile. Therange is from 1 to 9360.max number Enter the keyword max then the maximum threshold number for the WRED profile. Therange is from 1 to 9360 KB.max-drop-dropnumberEnter the keyword max-drop-drop followed by the maximum number of packets for theWRED profile. The range is from 0 to 100 KBDefaults noneCommand Modes CONFIGURATION (config-wred)Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100-ON.9.8(1.0) Introduced on the Z9100-ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S6000-ON.9.2(1.0) Introduced on the Z9500.9.0.2.0 Introduced on the S6000.8.3.19.0 Introduced on the S4820T.8.3.11.1 Introduced on the Z9000.8.3.8.0 Introduced on the S4810.6.1.1.1 Introduced on the E-Series.Usage Information To configure the minimum and maximum threshold values for user-defined profiles, use this command. Additionally,to modify the minimum and maximum threshold values for the pre-defined WRED profiles, use this command. Ifyou delete the threshold values of the pre-defined WRED profiles, the profiles revert to their original default values.Related Commands • wred-profile — creates a WRED profile.1302 Quality of Service (QoS)
