The export-target and import-target support only the match the protocol and prefix-list options. Other options thatyou configure in the route-maps are ignored.Related Commands • ipv6 route-export — exports IPv6 routes to another VRF.match source-protocolSpecify matching source-protocol criteria while exporting or importing routes.Syntax match source-protocol {bgp | isis | ospf | connected | static}Parameters bgp Enter the keyword bgp to leak or share routes corresponding to the BGP protocol.isis Enter the keyword isis to leak or share routes corresponding to the ISIS protocol.ospf Enter the keyword ospf to leak or share routes corresponding to the OSPF protocol.connected Enter the keyword connected to leak or share connected routes corresponding to theVRF.static Enter the keyword static to leak or share static routes corresponding to the VRF.Command Modes ROUTE MAP MODECommand History This guide is platform-specific. For command information about other platforms, see the relevant Dell NetworkingOS Command Line Reference Guide.Version Description9.10(0.0) Introduced on the S6100–ON.9.8(1.0) Introduced on the Z9100–ON.9.8(0.0P5) Introduced on the S4048-ON.9.8(0.0P2) Introduced on the S3048-ON.9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.Usage Information Specify the matching criteria only after defining a route-map. Before using this command, you must enter RouteMap mode using the route-map route-map-name command. The match criteria that you specify isassociated with the route-map that you define.The export-target and import-target options support only the match protocol and match prefix-list options. Otheroptions that you configure in the route-maps are ignored.Related Commands • ipv6 route-import – imports IPv6 routes from another VRF.redistributeRedistributes leaked or exported routes corresponding to specific protocols.Syntax redistribute {imported-bgp | import-ospf | import-isis}Virtual Routing and Forwarding (VRF) 1657
